1. [R70] What should I do if I forgot screen lock pattern? CloseOpen
"1. Turn off the set.
2. Take out the SD card.
3. Long press ""Home"" key and turn on the set.
4. That will reset the set to factory default and clear everything including but not limited to all settings, e-mail and apk installed."
"No. R100 does not support QR code, because -
1. There is no QR code recognition application embeded.
2. The resolution of R100 webcam is only 0.3M pixels, which is not capable to resolve QR code.
3. What kind of SSD can be used on U121? CloseOpen
"U121 SSD is using mini card interface.
Although user can get mini card interface SSD from market, but we do not guarantee they are compatible.
U121 SSD pin definition is special for BenQ, it is not a standard spec.
Please contact BenQ service center to purchase an official approved SSD.
4. [LM100] What is the maximum SDHC card size supported for LM100? CloseOpen
Up to 32GB class 10 is supported, it's recommended to use Sandisk SDHC cards to avoid compatibility issues.
5. [LM100] Up to how many faces can be detected with "face tracking" function? CloseOpen
10 faces, but the number of detected faces might be different from the actual ones, depending on environmental factors such as light.
6. [LM100] Why isn't sound recorded when I zoom in and out during recording? CloseOpen
Sound is temporarily muted during zoom in/out to prevent lens motor sound from being recorded.
7. [LM100] How do I find out whether the camera is fully charged or not? CloseOpen
When the battery is being charged, the status of LED indicator will flash in green, and will be off after it's been fully charged.
LM100 may be charged thru both USB cable (to PC) and AC power adapter (to wall outlet).
9. How to deactivate power saving model in order to prevent my monitor goes into sleep? CloseOpen
For all versions of Windows Operating system - Click START button, then click on CONTROL PANEL. Select POWER MANAGEMENT icon. Under Power Schemes drop-down menu, select - ALWAYS ON.
10. [G2222HDL] What can I do if colours diplayed on G2222HDL are printed too dark on my printer? CloseOpen
"To calibrate color, we suggest you to set picture mode in OSD to “sRGB” for better color matching.
You could also try to enter into the factory mode & adjust the color temperature according to the steps as below.
1. Enter into FACTORY mode: Press[MENU], [Enter]& [POWER] at the same time, when Monitor is power on, OSD menu will be shown with “F”
on the left top. Select “F” for entering factory mode.
2. To adjust the color temperature:
a. Do “Auto Color Balance” at 1920×1080@60Hz, 32gray shades
b. Measure color temperature, check it complies with the
following temperature :
5800K x=0.326 +/- 0.02, y = 0.342+/-0.02
6500K x = 0.313 +/- 0.02, y = 0.329+/-0.02
9300K x = 0.283 +/- 0.02, y = 0.297+/-0.02
If the user wishes to do more professional color calibration, he can consider buying a monitor color calibrator, such as “eye-one”.
The calibrator would produce suitable ICC profile for Photoshop.
* if you still have any questions, please feel free to pose your questions here and we'll reply as soon as possible.
